1 Introduction

1.1 Getting Started

This White Paper is intended as a guide for the configuration of the PBX devices listed below to connect to the voipGATE service.
The intended audience of this document is the PBX Administrator or Network/Solutions Integrator of the PBX device.
Please ensure you have received the Welcome Email from voipGATE for the required SIP trunking information necessary to configure the PBX.
Unless otherwise stated please use the default or factory settings.

1.2 Version Compatibility

The build versions utilised in this series of testing are;

voipGATE version utilised: 1.4.r.75450

CISCO CUCM Software tested: 7.0.1.11000-2

NOTE: Please note that differing results of compatibility may be experienced on other releases/versions of the same product line.

1.3 Latest Information

All information presented in this document is current at time of writing.

The latest information regarding Cisco build versions should be sourced directly from the Cisco website which you can find at: www.cisco.com
The latest information regarding voipGATE compatibility and testing should be sourced directly from the voipGATE Support page which you can find at: www.voipgate.com

Or, conversely, if you have tested a version that is not present on our Support site, please feel free to post your findings on our Forum: http://www.voipgate.com/forum/

The product’s pictures and names mentioned in this document are trademarks or registered trademarks of their respective owners. VoipGATE SA does not claim any ownership rights to these pictures, products, logos and brands.