3 Media Gateway Configuration

NOTE: To avoid possible interruption or potential loss of all services and communications we recommend that the configuration of the Funkwerk Media Gateway only be performed by an approved Funkwerk Administrator or Technician. Please contact your nearest Funkwerk Enterprise Communications partner/representative or Funkwerk Solutions Integrator for assistance

3.1 Confguration of voipGATE Trunks on Media Gateway

Refer to your Welcome Email from voipGATE to ensure you have the following info ready:

• STUN Server

• STUN Port

• Outbound Proxy

• SIP/IAX Proxy/Registrar

• SIP/IAX User ID

• SIP/IAX Authenticate ID

• Password

• Time Server

3.2 Funkwerk for configuration

The following are required for the configuration:

• A bintec media gateway with system software 7.6.6.

• A DSP module (4-way) must be installed

• An Internet connection with sufficient bandwidth (recommended uplink bandwidth >= 256 kbp/s)

Configuration in this scenario is carried out using the Funkwerk Configuration Interface™.
For further support and information of the following configuration and other scenarios of Funkwerk products, please refer to the FEC Application Workshops at the link provided. http://www.funkwerk-ec.com/portal/downloadcenter/dateien/workshops/workshops_v40_en/ws_v40_online_en/start.html

3.3 Modify SIP Account

Configure the SIP Account per the folloiwing:

3.4 Modify Call Routing

Configure the Call Routing as per the following:

3.5 Modify Call Translation

Configure the Call Translation as per the following: