| Article Index |
|---|
| Media Gateway R1200, R4100 & R3000 |
| voipGATE Settings |
| Media Gateway Configuration |
| Using voipGATE |
| All Pages |
Page 4 of 4
4 Using voipGATE
4.1 Making Test Calls
After successfully configuring your voipGATE Service you should validate your settings by performing the following series of calls, checking ringtone, audio & quality on all calls:
- Test an Outbound call to a Local Fixed Number. (same Area Code)
- Test an Outbound call to a Local Mobile Number. (to Mobile Network)
- Test an Outbound call to a Local Fixed National Number. (different Area Code)
- Test an Outbound call to an International Fixed Number.
- Test an Outbound call to an International Mobile Number.
- Test an Outbound call to Auto-Attendant (check DTMF)
- Test inbound to an internal DID (for each DID created)
- Test inbound to Auto-Attendant (check DTMF)
- Test transferring calls off-site (to an external number)
- Test Outbound call to Emergency Services (as required. Ensure Emergency Services Operator is advised that this is a test call!)
4.2 voipGATE Support
voipGATE Support can be obtained via our web portal which can be found at: www.voipgate.com/site/support
Or by contacting voipGATE Support directly @:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it