| Article Index |
|---|
| AVAYA IP500 |
| voipGATE Settings |
| IP500 Settings |
| Using voipGATE |
| All Pages |
Page 3 of 4
3 Avaya IP500 Settings
3.1 Confguration of voipGATE Trunks on the Avaya IP500
a) Create a new SIP line
=> fill in:
- ITSP Domain Name
- ITSP IP Address (refer to Welcome Email from voipGATE)
- Username (yyyy) (refer to Welcome Email from voipGATE)
- Password (xxxx) (refer to Welcome Email from voipGATE)
- Set Use Network Topology Info to “LAN1”
- Other settings as per screenshot below
b) On the System tab go to LAN1 tab and then to Network Topology tab
- Fill in the STUN Server IP Address: in this case 80.92.86.23 (refer to Welcome Email from voipGATE)
- Set Firewall/NAT Type to “Full Cone NAT”
- Fill in your Public IP Address
- Click “RUN STUN” button & wait a moment for the IP Office to respond
c) On the SIP URI tab :
- set Local URI to “Use User Data”
- enter the IP Address of the Avaya IP Office
- fill in the Incoming and Outgoing Group (in this case “6”)
d) Create a new Incoming Call Route
=> Fill Line Group Id with the same Id as configured in “SIP URI” (in this case “6”)
e) On the User tab there will be a SIP tab
=> In the SIP Name enter the DID number that you received from voipGATE.
=> Use International Dialing format ie. “352xxxxxx...”
f) Create a new Short Code
- in this case these are “600N” and “6N”
- see screen shots below
Short Code 600N:
Short Code 6N:
g) Also create a new ARS route to link the Short Codes to.
